Página Inicial : SERVOS & ACESSORIOS : Braços p/servos
Nelson Hobby braço p/servo ARM Single 1 1/2 JR,Hitec Dig.,M-plex Std (1/Pk) | Ref.: NELSSA150
Fabricantes: Nelson Hobby/Rocket City
Disponibilidade/Entrega: até 1 dia útil
Quantidade em Estoque: 1
Mais Informações
Our servo arms are made from 1/16” thick aircraft quality 2024T-3 aluminum. The servo arm is attached to the top of a typical round plastic or metal servo wheel. Four legged servo arms can be used too. Over many years of use and thousands of applications of our servo arms, we have found that the attachment of our servo arms to the standard factory supplied plastic servo wheels is very reliable and suitable for almost any size radio control model airplane including 50% size aerobatic airplanes and 200 MPH jets and pylon racers. The servo arms are attached to the servo’s wheel with four 2-56 screws and held in place with four subminiature 2-56 elastic stop nuts. A NELSON RCL87 heavy duty 4-40 ball link is attached on the underside of the servo arm and is held in place with 4-40 screw(s) and a subminiature 4-40 elastic stop nut(s). The design allows for the movement of the ball link when 45+ degrees of control surface travel is required. Shown in photo is a 1 1/4" arm mounted on a JR servo. 1 per package.