This is the O.S. Engines GGT10 10cc Gasoline Engine
with PowerBoost Pipe.
Glow plug ignition for easy starting and elimination of ignition
modules and batteries
Ideal for .40 size aircraft
Same mounting dimensions as the O.S. Engines .46AX and .55AX
Runs on an inexpensive 50:1 gasoline/oil blend
PD-08 pump regulates fuel flow for consistent delivery, Tygon fuel
tubing between pump and carburetor with in-line fuel filter
PowerBoost Pipe improves performance at all points from idle to full-
throttle
GGT10 10cc Gasoline Engine
E-3071 PowerBoost Pipe
M3x35mm Socket Head Cap Screws for mounting muffler
Two 3mm Locknuts
G5 Gasoline Glow Plug
Drive Hub, Prop Nut, Washer and Instructions
Unleaded gasoline, 2-stroke oil
Propeller: (Recommended sizes include: 12x7, 12x8, 12x9, 13x6,
13x6, 13x7 and 13x8)
Glow starter & field equipment
Displacement: .61 cu in (10 cc)
Bore: 0.945 in (24.0 mm)
Stroke: 0.846 in (21.5 mm)
RPM Range: 2,000 - 11,000
Output: 1.58 hp @ 10,000 rpm
Total Weight: 19.8 oz (561 g)
Engine Weight: 15.97 oz (453 g)
Muffler Weight: 3.81 oz (108 g)
Distance between Mounting Hole Centers Same Side: 0.69" (17.5mm)
Distance between Mounting Hole Centers Opposite Side: 1.7" (44mm)
Width at Mounting Tabs: 2.0" (51mm)
Width of Crankcase below Mounting Tabs: 1.4" (36mm)
Length from Crankcase Center to Exhaust Outlet: 3.9" (101.3mm)
Height/bottom of Mounting Tabs to Muffler Bottom: 1.24" (31.7mm)
Height/bottom of Mounting Tabs to Top of Cylinder Head: 2.8" (72mm)
height/bottom of Crankcase to Top of Cylinder Head: 3.5" (89.8mm)
Length/Crankcase Center to Drive Washer: 2.7" (69.1mm)
Length/Crankcase Center to end of Crankshaft: 3.34" (85mm)
Length from Pump to end of Crankshaft: 5.1" (130mm)
Crankshaft Size: UNF 1/4-28
Muffler Angle Relative to Engine: 4°