Busca de Produtos

Departamentos

OS Engines motor 4 tempos FS-155-a com bomba | Ref.: OSMG35430

OS Engines motor 4 tempos FS-155-a com bomba

Fabricantes: OS engines

Disponibilidade/Entrega: Clique em AVISE-ME QUANDO DISPONIVEL (3 a 25 dias)

Quantidade em Estoque: 0

 
SOB ENCOMENDA

Avise-me quando disponível

Mais Informações

This is the FS155-a P Four Cycle Engine with Pump System from O.S. Engines.

FEATURES: Ideal for 120 size scale and sport models and aerobatic models
requiring stable power and linear throttle response
PD-08 pump and 70R carburetor integrated with regulator ensures
stable fuel delivery regardless of model attitude and fuel level
F-6020 three piece design muffler with center heatsink
New internal lubricating system eliminates breather tubing from the
crankcase

INCLUDES: FS155-a P Four Cycle Engine with PD-08 Pump System, 70R Carburetor
F-6020 Muffler, Header Pipe, type F Glow Plug, Needle Valve
Extension Cable, Instruction Manual


REQUIRES: Fuel: Glow fuel with 5-20% nitro content and no less than 18%
lubricant content
Propeller: 16x8-12 or 17x8-12
Glow Starter
Field equipment


SPECS: Displacement: 1.548 cu in (25.36cc)
Bore: 1.323" (33.6mm)
Stroke: 1.126" (28.6mm)
Practical RPM: 2,000 - 10,000 RPM
Power Output: 2.6 PS, 2.56 HP @ 10,000 RPM
Engine Weight: 28.40 oz (805g)
Muffler Weight: 3.35oz (95g)
Carburetor Settings-
Needle Valve: 2-1/2 - 3 turns from fully closed
Mixture Control Valve: Factory set, make only small adjustments if
needed, after adjusting needle valve as described in manual, turn
30° to lean idle mixture or 90° counterclockwise to richen mixture
then back again 45° clockwise


Width at Mounting Tabs: 2.6" 67mm)
Crankcase Width below Mounting Tabs: 1.8" (47mm)
Length from Drive Washer to rear of Carburetor: 5" (127.5mm)
Height from Mounting Tab to Pushrod Cover: 4.5" (114mm)
Height from bottom of Crankcase to Pushrod Cover: 5.4" (138.6mm)
Distance between Mounting Hole Centers Same Side: 0.98" (25mm)
Distance between Mounting Hole Centers Opposite Side: 2.3" (58mm)
Distance/front Mounting Hole Center to Drive Washer: 2.5" (64.5mm)
Distance/ Center of Engine to Drive Washer: 3.03" (77mm)
Crankshaft Size: 5/16-24 


Ofertas validas em quanto durarem os estoques. Preços, ofertas, estoques e condições de pagamento são validos para compras na loja virtual e em nossa loja fisica. Todos os preços e condições comerciais estão sujeitas a alteração sem aviso previo. As imagems dos produtos são meramente ilustrativas. Vendas sujeitas a análise e confirmação de dados.
 

Formas de Pagamento

VisaMastercardAMEXDiners ClubBanco do BrasilBradescoCaixa EconômicaBanco ItaúPix/Depósito/Transferência
e-box ShopSitevip Internet