Busca de Produtos

Departamentos

Página Inicial : MOTORES AEROMODELISMO : Motores AERO - 2 tempos

Os Engines motor 2 tempos 46AX II ABL 40K E-3071 | Ref.: OSMG15490

Os Engines motor 2 tempos 46AX II ABL 40K E-3071

Fabricantes: OS engines

Disponibilidade/Entrega: até 1 dia útil

Quantidade em Estoque: 4

Lançamento

Por:
R$ 1.675,00
ou 6x de R$ 279,17 sem juros
À vista:
R$ 1.591,25 com 5% de desconto
Veja as formas de pagamento Calcular Frete e Prazo

Mais Informações

This is the O.S. Max .46AXII ABL BB Model Airplane Engine with Muffler.
              Ideally suited to sport and aerobatic aircraft.
FEATURES: Advanced Bi-Metallic Liner. This process uses a double layer of
            plating material rather than one thick layer. This helps the metal
            to bond to the cylinder and is more durable. Also, the plating
            process is more consistent, resulting in a more precise fit between
            piston and sleeve for better compression, longer life.
          Side exhaust
          E-3071 Power Box muffler with squared-off shape enables it to fit
            into a variety of cowls
          40K carburetor with rear angled needle valve for added safety
          Ball bearing-supported crankshaft
         
INCLUDES: One O.S. Max .46AXII ABL BB model airplane engine w/muffler, A3 glow
            plug, two 3mm x 35mm cap head muffler screws, extension cable for
            remote needle, 3mm x 35mm cap head muffler screws, warranty sheet,
            decal sheet, and illustrated instruction manual

REQUIRES: Fuel containing 5%-20% nitromethane with at least 16% lubricant
          Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life. In the
            past, the conventional lubricant content used in fuel was 18%. But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower. These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:    Displacement: 0.455 cu in (7.45cc)
          Bore: 0.866" (22mm)
          Stroke: 0.772" (19.6mm)
          Practical RPM: 2000-17000
          Power Output: 1.65PS, 1.67HP/16000 RPM
          Weight: 13.3oz (378g) without muffler
          Recommended Propellers: 10.5x6, 11x6-8, 12x6-7, use 10x6 for break-in
          Crankshaft Size: 1/4-28
          Distance from remote needle to end of crankshaft:  4.7" (119.4mm)
          Distance from center of engine to drive hub:       2.4"    (61mm)
          Distance from center of engine to end of crankshaft:  3.4"  (87.6mm)
          Distance/crankshaft center to muffler exhaust outlet: 3.9" (100.5mm)
          Height from crankcase bottom to top of cylinder head: 3.3"  (85.2mm)
          Height/crankshaft center to top of cylinder head:     2.6"  (67.4mm)
          Width including mounting tabs:                          2"  (50.8mm)
          Width not including mounting tabs:                    1.4"  (35.6mm)
          Width/mounting hole centers same side:                .69"  (17.5mm)
          Width/mounting hole centers opposite side:            1.7"    (44mm)
          Diameter of muffler body:                             1.5"  (38.1mm)
          Angle of muffler in relation to engine:               4°
          Carburetor Settings;
            Needle Valve: 1½  to 2 turns out from closed position
            Low Speed Needle (aka: Mixture Control Valve): Close throttle rotor
             gradually from the fully opened position until it is just fully
             closed (do not turn further).
             Screw in the Mixture Control Screw until it stops. Now open the
             Mixture Control Screw approx. one turn.
 


Ofertas validas em quanto durarem os estoques. Preços, ofertas, estoques e condições de pagamento são validos para compras na loja virtual e em nossa loja fisica. Todos os preços e condições comerciais estão sujeitas a alteração sem aviso previo. As imagems dos produtos são meramente ilustrativas. Vendas sujeitas a análise e confirmação de dados.
 

Formas de Pagamento

VisaMastercardAMEXDiners ClubBanco do BrasilBradescoCaixa EconômicaBanco ItaúPix/Depósito/Transferência
e-box ShopSitevip Internet