This is the radio controlled, glow powered, almost-ready-to-fly
.46-.61 Edge 540T QB (Quick Build) Airplane from Aeroworks.
For Intermediate pilots wanting to perform IMAC, Pattern and most 3D
type maneuvers.
FEATURES: Construction: Laser cut and laser cut balsa and ply
Wings: Two-piece balsa and ply construction with plywood joiner
Aileron Control: Dual servo
Rudder Control: Single servo
Engine Box: Plywood, installed and fuel proofed
Engine Mount: Two-piece composite
Cowl: Painted fiberglass
Covering: Ultracote
Canopy: Clear, pre-mounted
Landing Gear: Painted aluminum, three foam, tail wheel assembly with
rudder tiller, three foam wheels
Fuel Tank: 9oz (260cc)
Spinner: White plastic 2.25" (57mm)
Wheel Pants: Painted fiberglass
Building Time: Ready to fly in approximately 8-10 hours
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
all hardware, decals, fuel tank, landing gear, wheels, spinner and
instruction manual on CD
REQUIRES: Radio: 4-channel minimum computer radio strongly recommended
Aileron Servos: Two with at least 60 oz/in torque @ 4.8V
Rudder Servo: One with at least 60 oz/in torque @ 4.8V
Elevator Servo: One with at least 60 oz/in torque @ 4.8V
Throttle Servo: One standard size and torque
Y Harness: One for ailerons
6" (152mm) Servo Extension: One for ailerons
18" (45.7cm) Servo Extension: One for elevator
Receiver Battery: 4.8V 1100mAh minimum
Engine: .46 -.61 cu in (7.5 - 10cc) 2-stroke with standard or
Pitts muffler
Propeller, building and field equipment
SPECS: Wingspan: 60" (152cm)
Wing Area: 693 sq in (44.77 sq dm)
Fuse Length: 55" (140cm)
Weight: 5.5 - 6lbs
Airfoil: Fully symmetrical
Center of Gravity: 2.75" (70mm) back from the leading edge of the
wing at the wing root where it meets the fuselage
Control Throws- 3D Rate High Rate Low Rate
Elevator Up: 2-3/8" or 40° 7/8" or 15° 3/4" or 30°
Down 2-3/8" or 40° 1" or 17° 7/8" or 30°
Rudder Left to Right: 3" or 35° 2-1/2" or 30° 2" or 30°
Ailerons Up: 1-1/2" or 30° 1" or 24° 3/4" or 18°
Down: 1-3/8" or 30° 7/8" or 22° 5/8" or 16°